The TruLink Wireless USB to VGA kit allows a user to easily connect a computer or laptop with a USB port to a VGA projector, monitor or television and an accompanying speaker system utilizing Ultra-Wide Band technology for a signal up to 30 feet away. TruLink makes their product fairly easy to set up, if your computer meets the proper hardware and software requirements. Simply insert the USB transmitter into a computer and the VGA receiver into the display and stream video wirelessly from any location. The kit also includes 3.5mm audio signal for connection to laptops, music players, or most audio devices. For extra security, the TruLink Wireless USB to VGA kit features a Kensington lock port that one typically finds on laptops which helps to deter theft.

The Pros and Cons

A simple set up makes this device ideal for conference and classroom settings as well as large scale presentations and event halls. The theft deterrent including is also a major plus, as one should always make sure expensive equipment is properly protected. Unfortunately, not all widely used devices are supported by this kit. The TruLink Wireless kit does support native high resolution images if the display allows, though it does not have HDMI support for 720p or 1080p projector or monitors, which have become very popular recently. Additionally, the TruLink Wireless kit requires drivers to be installed on all versions of Windows and does not guarantee support for Mac or Linux operated sources.The kit is able to support up to six computers one display and speaker system or six wireless display from one computer, which can be useful in larger sized settings. The use of this function does require the purchase of additional USB or VGA adapters depending on which set up you prefer, but these are sold individually through TruLink.

The Bottom Line For TruLink Wireless USB to VGA kit

The TruLink Wireless USB to VGA kit is priced at $230 with a street price of around $170 through most retailers. Anyone with experience in education or conference room settings can tell you what a hassle it can be to set up a wired system that is hidden from view. This can easily require hiring a professional to ensure that the system is properly installed. The TruLink USB to VGA Wireless kit eliminates the need for any kind of complicated set up or ugly, hanging wires. It was designed for specific situations where wireless technology really is a necessity. For use in a home setting, this product is perhaps a bit too much but in any kind of professional environment, there is no other way to go.

Britney Baker is a freelance writer who normally reviews prepaid wireless phones at PrepaidCellphones.net. Her latest review looked at the Go Phone.

They are more and more people out there wondering on how to record TV shows on PC. If you are one of these people, then you are now at the right place. According to a survey from a famous TV magazine, on average there are over 60% of people in this world spending about 45% of their 24 hours with the computer. Therefore, this is quite apparent why many of them are keen to know how to record their favorite TV shows from their PC.

If you want to know but having no idea at all, it’s OK as all you need to do is just follow the step-by-step guide below.

Instructions

Step 1
Hook the capture device or PC to TV Converter into your PC and install the necessary driver for that. Don’t forget to read the capture device of PC to TV Converter installation guide to ensure that you’re not going to face any problem by do it right the first time.

If you plug your capture device or PC to TV Converter through USB connector, then it is not necessary for you to set up any extra drivers.

Step 2
Download AVS TV Box from http://www.qweas.com/download/video_dvd/video_players/avs_tv_box.htm

AVS TV Box Beta is actually a FREE universal software TV viewer that come with Personal Video Recorder functionality (PVR) letting you to do TV recordings scheduling. It is simple, easy to use with clearly structured interface, one-click switch to full-screen mode, adjusted Aspect Ratio, skinable interface make viewing more comfortable.

After downloading, install the AVS TV Box into your PC. AVS TV Box works as both video recorder as well as TV recorder software which is able to let you watch and record anything range from miniDV cameras, video capture cards, web cam, TV and DVB cards, satellite and more.

Step 3
Before you can watch anything, you have to configure your channels in AVS TV Box. On the main window of AVS TV Box, you’ll notice a “Configure” button. Just click on this button.

Step 4
At the top of the configure windows, you’ll notice a tab called “Device Params”. Choose this tab as it carry out the task for you to set the device parameters.

In most cases, the setting availability are actually depends on the device type. Just get TV tuner as example, there are some options you have to configure such as the broadcast country, Video input, Audio device, Video standard depending on the country and broadcast standard, antenna or cable TV Source and Audio input that serve as an audio source.

Step 5
Right after that, click on the “Channels” tab within the configure window. Click on “Add Channel” to include the cameras to your channel record, or you are able to Scan for TV or Digital TV tuners to search for the existing stations.

See the “Add to Favorites” button, now? Press it. to include the preferred stations towards the record of favorites so it could be displayed on your “Favorite” window. This will permit you to switch to it with ease.

Let’s think about the example with the TV tuner once much more.

Click on “Scan” to begin scanning for all with the stations. If you need to scan All of the stations the tuner supports, you will probably be given the opportunity.

If you would like you are able to set AVS TV Box to automatically include all of your stations with great signal strength towards the favorites record. To do this, merely verify the verify box that says “Automatically include the stations with great signal towards the favorites record.”

Right after the tuner finishes locating all with the stations, you are able to choose them 1 by 1 from the record returned and select individually which ones you would like added to your favorites record.

The stations which are already in your favorites record will probably be indicated with a red mark next to their name. If you would like, you usually have the choice of clearing your record of stations and starting a new scan, by clicking “Clear”.

If you need to view the stations properties and change some of them, click on the “Properties” button.

Step 6
Choose the Paths tab with the Configure window to set the recordings and snapshots paths.

Step 7
Choose the File tab with the Configure window to set the video and audio parameters with the files that you’ll capture your video with.

Step 8
When you’ve finished adjusting all with the setting, give the “OK” button a click on to accept and apply all of the changes and close the configuration window.

At this point, you are able to begin recording the video by clicking the File button on the primary controls panel, take snapshots, and watch TV exhibits on PC.

That’s it! You’re done and by now you’ve learned how to record TV shows on PC.

There are many people who wish to display and share the latest photo images that they shoot lately with their family and friends. But since the screen of PC or laptop are too small for many people to view at the same time, most of the people will wish to hook them up to HDTV with the use of PC to TV converter. Many games lover could well be pleased to connect their PC or laptop to an HDTV to obtain a more satisfied game playing experience. Besides, hooking up the laptop to HDTV also enable people to view everything range from photos, presentations and movies on the big screen. Since there are too many benefits that we can have, therefore, I would write up this guide with the purpose of assisting you to setup the PC or laptop to hook up to your HDTV.

Traditional TV set

The cable that required to hook up both end will be depended on your TV and your PC or laptop. As fo today, almost all the new laptops are featuring with a S-video output built-in. Thus, as long as your laptop is having a S-video output and your HDTV is having a S-video input, then you will just need a S-video cable to establish the connection from both end. Nevertheless, in case you are having an older laptop and also older TV model, then you may need to get a standard RCA or composite video cable that normally is of yellow color with connectors at both end.

High Definition TV (HDTV)

The recent HDTV are usually available in either Plasma or LCD. HDTV will cost a lot more expensive compare to older model TV set and could easily cost you a couple thousands of dollars should you buy a large screen size HDTV. All of the HDTV sets are in 16:9 ratio with output for 5.1 digital sound.

You are able to receive high resolution content from your HDTV by doing a fine tune of the HDTV and you will get a higher quality image. As mentioned before, you would need to use a S-video or a RCA composite video cable to hook your laptop to your HDTV. If there is no S-Video or RCA composite connection for your laptop, then try to find if the VGA or DVI port is available.

Once you know which type of connection your laptop possess, then you may start proceed to hook them up.

1. First, you need to carry out a little task by figuring out whether you have the right cable for you to hook up your laptop to the HDTV.

To obtain a higher definition for the image quality, it is advisable for you to connect the laptop or PC to your HDTV with the use of standard VGA to S-Video, DVI to HDMI, or HDMI to HDMI cable depended on what port your laptop and your HDTV have.

In case you PC or laptop doesn’t feature with a DVI port, you can convert the USB port of your laptop to become a DVI port with the use of an adapter to hook it up to your HDTV. Such adapter is come with 128MB onboard memory, allowing it to cater for up to 1400×1050 resolution that can provides you with image quality that are almost the same as a DVI port.

2. You need to ensure in which you have hookep up the cable to your HDTV prior for you to switch on the PC or laptop since if not doing so the device may not able to detect an external display. You can turn on the display settings by selecting the Start Control Panel Personalization, after that select “Connect to a projector or other external display” so that you can enter into Windows Mobility Center. Next, you should choose “Connect display” option to make it detect and activate output to your HDTV screen. Now, you will be able to either make the image display on both your PC/laptop and HDTV or only on your HDTV.

3. Get your TV remote control and turn the menu to “External Inputs”. What you need to do next would be change the “Video 1″ option to another option such as “Video 2″ or “HDMI 1″ depending on the way you do the connection.

Important: It can be sometime requires you to alter the resolution of your HDTV screen by meddling with the Display settings in the Control Panel to get rid of the distortion.

Setup Audio from PC/Laptop to be Hear on HDTV

In this point, you will be able to watch your PC/laptop content on your HDTV. However, there will be no sound coming out. The next thing tha you need to do is get an audio cable to transform the auto from your PC/laptop to your HDTV. All the laptop will have a mini-headphone jack input, therefore you could simple get a mini-headphone cable that have male connectors on both ends and hook the both connection of your PC/laptop and TV and you will be able to get sound in no time.

Otherwise, in case your HDTV doesn’t features with a mini-headphone jack input, you are able to get audio by connecting both end with a headphone to RCA cable.

There are many PC to TV Converters available in the market nowadays. However, the most reliable one always wins customers’ heart. For you, will you go for Grandtec PC To TV Converters or Sabrent PC To TV Converters? For Sabrent, the device can effortlessly connect the VGA port on the desktop computer, notebook, gaming console, and so on. You would connect your TV using this one-piece PC TV Converter.

The PC to TV Converter doesn’t need any software. You just have to connect your VGA source to the converter by using the VGA cable that attached inside the box. The PC to TV Converter transforms the VGA signal to make it play on the TV. You are able to connect it to your Television via composite video or S-video(with the RCA connector). The converter is powered via USB, so there isn’t any external power adapter to carry around since the converter is powered through USB. This enable the converter really portable to be used along with a laptop.

In addition , you receive an additional VGA-out port so you are able to use your existing monitor as the secondary video source. The PC to TV Convertor basically mirrors your pc’s existing video signal for output on an additional display, just like a Television, VCR, or almost every other video display with a RCA or S-Video input.

This PC TV Converter doesn’t consist of audio. You have to get a handy 1/8 inch to RCA Audio cable with sound connector for the sound card to Audio RCA.

To watch satellite TV on PC is a relatively new concept for many people. This article will teach you how to do just that, allowing you to watch satellite TV programs without any costly and complicated installation of satellite dishes at all.

For those living in rural areas of the world without access to cable television, satellite dishes were the only way to go. These dishes were the necessary components, pulling in distant TV signals otherwise covered in snow. The process of creating a satellite dish was nothing simple through and demanded lifting the plate in a suitable area, and is fixed with a low noise converter block. Finally, a receiver or decoder had to be configured and set up the TV signal would be receiving. Fortunately, satellite observation of PC is much simpler, not to mention cheaper.

The hardware and basic computer requirements needed to watch satellite TV on your PC are:

1. PCTV

The first thing you do is enable your PC to receive and decode satellite TV signals. This is accomplished through a PCTV card. The card can be installed internally in the PCI slot of the computer hardware that connects the PCTV card directly to the motherboard, or externally through the USB port. If your computer has a USB port, you may need to buy an adapter. Finally, you must be connected to the Internet, and this is discussed later.

2. Internet access

For transmission of high quality, we recommend having a broadband connection of 512 KB or larger. For those who do not have the option of broadband in your area, you can watch satellite TV on your PC with this configuration, but the quality of the telecast is understandably declined.

3. Equipment Specifications

Recommended minimum requirements to view satellite TV channels on your PC the best include 128 MB of RAM and a Pentium 3 system. Most modern computers easily meet these requirements, or can be upgraded at minimal cost.

4. Optional Computer Peripherals

For further viewing pleasure, we recommend the installation of high quality graphics and sound cards on your PC. This will ensure a better flow of the video signal, and immerses you into the program with the sound increased. Sub-woofer or surround sound systems compatible with your computer are ideal for audiophiles.

See the live satellite TV on computers has never been easier, and this is just one of many great ways to enjoy it. Another newest technological gadget used to receive satellite TV programs is the PC satellite TV software. Anyone interested in learning more about this revolutionary way to watch satellite TV on PC can explore my TV blog.

2 Types of TV Tuner

There are 2 types of TV tuners for laptop, is a solution based on hardware and other software. Both work well on laptops, but vary in terms of costs, the number of channels offered and portability. These will be discussed in this article.

First Solution of TV Tuner

The first solution is to get an external PCTV card for your laptop. External PCTV cards come in the form of USB device. This TV tuner for the laptop usually comes with its own software that lets you listen to hundreds of live TV channels via broadband cable. A device like that costs a few hundred dollars and can be found in every major PC hardware.

Second Solution of TV Tuner

The other TV tuner software is commonly known as satellite TV software. This software once installed, gives access to thousands of channels from around the world in different languages. It streams live satellite channels over the Internet and works on both wired and wireless broadband.

Both solutions require only a single time it is for the purchase of hardware / software. However, it is interesting to note that a good satellite TV software will cost no more than $ 50. It can provide over 3000 channels in a standard package.

In terms of portability, PCTV Most cards require a cable connection while wireless connections work well with the satellite TV software. This means you can be watching a football game or favorite TV show in a cafe or anywhere in the world with a WIFI connection. Personally, the satellite TV software is, for me, a TV tuner preferred due to its portability.

Before you purchase a PCTV card or satellite TV software is good for sure they are compatible with the operating system of your laptop. Windows Vista or Windows XP should be fine but if you are running Mac, it’s best to consult with the merchant’s product or read the FAQ before making a purchase of TV tuner.

Satellite TV for PC really a scam? Some people think it is. There are several reasons why some people may think so. One of the main reasons is that many people simply do not understand how Satellite TV for PC. They do not know about free-to-air channels on satellite television, advertising revenue and streaming video over the Internet. If you understand these concepts you can understand why most satellite TV channels are freely available over the Internet.

Here are some reasons they give when asked why they think of satellite TV on PC is a scam:

1. Some people think it is too good to be true, because no subscription fees or monthly fees.

The truth is that there are many satellite TV channels that do not charge subscription fees. They receive money from advertisers. After the community television, national television and many other types of satellite television channels that are sponsored in one way or another. Satellite TV software takes all the flows of Internet TV channels and organized in order to be able to see them. It is similar to what other satellite TV channels do. They do not provide the programming, but provide the means by which you can access TV channels from multiple vendors.

2. Some people say it’s illegal and what is a scam.

Satellite TV for PC is not illegal. If you visit the websites of many TV channels, you find that you can watch your TV from your website for free. These programs are transmitted to your PC via the Internet so that you can access them through a media player like Windows Media or Real Player. Satellite TV for PC lets you access all these streams of various TV Nay different suppliers. Millions of people are using satellite TV on PC software. If it is illegal many of the websites providing this kind of software have been closed for now.

3. Some people think Satellite TV for PC is a scam because they think it’s impossible to watch satellite TV channels on your PC.

If you want to prove how wrong these people are, just go to Youtube.com or any website streaming video and you will be surprised what you can find on your PC. Many regular television programming stream high-quality TV over the Internet so that viewers can watch television shows free online. Satellite TV for PC until peaks streamed satellite TV channels from around the Internet and allows you to view these channels on your PC.

4. Some people think it is a scam because they are confused about the satellite TV for PC software and TV tuner cards (or the PCTV Card).

These two are different. Satellite TV for PC software requires no additional equipment such as antennas and satellite dishes. PC TV cards and TV tuner cards require television antennas and other equipment. Do not buy a TV tuner card and hope it works like satellite television for PC software. The two are different.

As you can see from the above, satellite TV for PC is not a scam. There are many people who are using proprietary software to access thousands of satellite TV channels on their PCs and laptops.

You can watch TV anywhere these days, why not on your desktop or laptop? Installing a TV tuner card is easy and highly sensitive alternative to purchasing an expensive TV. An even easier way to watch TV on your PC to install the TV software on the PC.

What you need to do to be able to watch TV on your computer

You need a TV tuner card or TV on PC software

1. TV Card: Some TV tuners support ATSC and NTSC and also work very well with Media Center and other PC DVR applications. Some popular brands include Hauppauge, Diamond and ATI.

2. PC on TV software or a PC to TV Converter: Some PC to TV converters and no software is completely independent of your computer so you do not even need to turn on the computer. Just connect your monitor to start watching TV on your PC monitor. PC TV software, there is no need for TV card and other hardware because all the channels are streamed through your Internet connection.

Installing a TV tuner card and TV on PC Software

This may involve opening your computer and insert the tuner card in a PCI slot available. After installing the PC tuner card, you may need a cable provider in order to be able to access cable television channels. The other option is to use TV on PC software.

Using TV on PC software to watch TV on your computer

With TV PC software is not necessary to install a TV tuner card. In fact, you do not need any additional hardware. All you need is a pretty good PC and software like Windows Media Player on your PC. If you are unsure with the installation of a TV tuner card, using television on PC software is an excellent choice.

TV on PC software has become very popular. The main advantage of using this type of software to watch TV is that you can access many satellite TV channels for free. You will be able to access television channels in different languages and different countries, plus their local channels.

Currently, I got a problem that I have to equip a Digital TV Converter Box in my RV(Recreation Vehicle). I am not sure whether does it go on the TV or is it has to connect to a TV Distribution Box that can set aside for me able to exchange signal of my Television’s from satellite/antenna and or cable? Then I found out in order to has my RV works, I have to install a Digital TV Converter Box.

Before Installing the PC to TV Converter

Prior to installation what you have to do is, If you have checked that your RV’s TVs did not have digital tuners, then you will get one one extra length of cable and Digital TV Converter Box for each TV. If you have a VCR that does not have a digital TV tuner, then you have to get an extra length of cable and a converter box for that. While you buy the converter boxes, make sure that they include the option of Analog Pass Through. The reason we needs Analog Pass Through is that it will permits analog signals to cross through the Digital TV Converter Box when it’s turned off. If you are hooked up to the cable at an RV park, or if you want to watch a video or DVD the TV to PC converter Box should be in power off status in order for the analog signal will be able to cross through the converter box and direct to your TV.

Getting a Digital TV Converter Box

If you did not get a Digital TV Converter Box with Analog Pass Through you’ll need to install the switches and essentially be creating a nightmare for yourself for the installation. What you have to understand prior to installation most RVs will get a video switch box come together with buttons and/or knobs which permits you to take numerous video sources for each of the TVs in your RV. But normally there are many selections like Satellite, VCR, Cable, Antenna, DVD, etc.

On the back side of the Video Switch Box you will observe plenty of cables in the box laying around, don’t intimidate by these cables. You will simply be worried about those cables that taking out from the Video Switch Box that going to connect directly to the TVs in your RV.

Depending how our RV is installed together with the Video Switch Box, you may consider to move things further around to allow the back of the pc/tv box where all cables are tangle there altogether. Due to each RV has different configurations, I cannot let you know how hard or how easy it’ll be to get to these cables on the back of the Video Switch Box.

At the back of PC/TV switch box  on each and every of the cables which are either go in or coming out. The converter cables where you’re looking for connecting right away to your Televisions they will marked such as TV1 Out or TV2 Out. The marking can be different depends on the manufacturer. The PC/TV Converter Box will be set up on the cable directing towards your TV from the TV/PC Switching Box. Where you set the PC/TV Converter Box on this cable it will depends on where the TV is actually located.