Last week I bought a DVD/VCR combo device to play with my favorite bluray DVD and come to know that I was lacked of S-Video to RCA adapter. But after all installation done, when I want to connect to my Philips TV super screen of 41 model rear screen projector to this unit, I just not able to make it successfully to connect them together. I that discover that the DVD/VCR required to have a S-Video to RCA connectors that with red, white and yellow color.
S-Video to RCA Adapter Needed For The TV
However, the TV unit only come with 2 audio connector which are of red and white color and a S-Video to RCA cable. Even I have the S-Video cable, I could only watch the DVD movie showing on the screen via AV1 connector but not the video because it required to connect the yellow video RCA lead. I then think that there must be some sort of splitter that I need to have to make it works.
I wen to the electronics store and get a Video to RF modulator as I think I might need to use the Channel 3 for displaying picture and sound output. Besides, I think that the S-Video to RCA connector is designed to separate the color from the Black and White portion of the signal. And it is hard to split the signal again since the DVD are both combined.
S-Video to RCA Splitter
Then I managed to find a S-Video to RCA splitter. The splitter can divides the RCA and TV coaxial lead as well and the cost for the splitter is $20 with everything goes inside the little black box. Unless you have an HDTV, a standard definition TV can turn out to be a horrible monitor as they only can display low resolution image.
VGA is RGB while s-video/composite is in the Luma/Chroma space, so I really need a converter. I think I might as well buy a new video card with video out (HDMI is more preferable for my situation as I could make use of the HDMI on my HDTV).
If you search around and ask for the store assistant in the electronics store, you will figure out that there is no such thing as a VGA to video adapter cable. What I found after that the device that I need is called a “scan converter” which can converts VGA to video. Since I know VGA signal does not being translated in that way, I just get a video card with an S-Video out that come with standard.
If you have such problem as I face, first you should make yourself clear that passive notch filters like these degrade signal quality greatly versus a real signal converter. So I would always recommend spend a bit more money on any device that can bring better quality for you to enjoy high definition image. The adapters with a composite cable on it or whatever will definitely be degraded, and you will found out later that you would not very happy with the result.
S-Video to RCA Cables From Amazon
Amazon carry (straight shot) cables that may carry out the function extremely nicely and also the cost is extremely sensible. They’ve 4 pin and 7 pin S-Video to RCA all in 1 cable, not a splitter or adapter. Not as ideal as Vince’s pricey suggestion, but a lot a lot much better than the passive adapter your searching to attempt.
I was extremely skeptical and felt it would degrade the S-Video signal just as poor because the PE adapter and great composite cable did, however it was “not anyplace close” to as poor because the image when utilizing the PE passive adapter. The adapters are are available in 1 3 6 12 24-ft lengths.
1 point of note: The signal kinds for Composite RCA and Y/C S-Video are totally different– so much more than an “adapter” is required to convert the signals. It is advisable to go for S-Video to RCA adapter and converter to enhance your TV watching experience.
Popularity: 5% [?]
{ 18 trackbacks }